An eSIM is an industry-standard digital SIM that allows you to activate a cellular plan from your carrier without using a physical SIM. You can also upgrade devices easily by registering your new device with your cellular network provider. Most Samsung, Google, Huawei, and other Android devices allow five to seven eSIM with one active at a time.

Galaxy Watch 4 e-sim provisioning via QR code

Requirements:

• Android 11 or later
• Installed physical sim (will not be used but must be installed on the phone)
• Installed Galaxy Wearable app

Activate QR Test Mode

1. On the phone, open the Galaxy Wearable app

2. Open Galaxy wearable settings, then select About Galaxy Wearable

3. Tap Galaxy Wearable five times

4. Select Test ESIM Feature

5. Select QR Test Mode

6. Tap Current QR Test Mode to switch it on. You’ve just activated the QR Test Mode.

Add and Activate Mobile Plan

1. Go to the Galaxy Wearable app home page, then select Watch settings

2. Select Mobile plans

3. Select Add mobile plan

4. Tap Use code

5. Scan the code with the QR code scanner, then follow the prompt until the plan is set.

6. Mobile plan might be set in an inactive status. To activate plan, select the plan from the list.

7. Toggle the switch on the plan

8. Follow the prompt until the plan is on

9. You’ve just activated the mobile plan added.

10. Disconnect the watch from the phone using one of the following methods:

• • In the Galaxy Wearable app by disconnecting from the watch
  • In the Galaxy Wearable app by totally removing the watch connection
  • Unpair Watch from the phone’s Bluetooth menu

Your Next Step is Enrolling your Galaxy watch to Knox Management