Getting started with Ideagen Workforce Safety as a Compass Group contractor
Who is this article for?
Company admins at contractor companies (or sole traders) who need to register their company and workers to work for Compass Group and its clients.
No special access or permissions are required.
Compass Group uses Ideagen Workforce Safety to keep records of every contractor and worker who comes on site. Requirements vary by client, location and the worker's role. Before your people can work at a Compass site, three things need to happen:
- Register and prequalify your company (or sole trader).
- Register and mobilise your workers to each client and location.
- Make sure your workers finish their online training and any site induction.
This article walks you through each step.
Compass is onboarding trade services only at this stage.
You can only mobilise workers into the approved trade-licensed roles listed in this article. Cleaners, general labour and other non-trade roles are not yet available. If your worker's role isn't listed, contact Compass Supplier Compliance before you start.
What you get
Your company receives its own online portal, available 24/7, where you can see which sites your workers are on, keep tickets, licences and training records in one place, update your company details and documents, and get a warning before anything expires.
If you use sub-subcontractors to deliver your work, they must also register their company and mobilise their own workers through Ideagen Workforce Safety.
Have you used Ideagen Workforce Safety before?
Yes — my company has used it before.
Your company is already set up, so skip Step 1. Go to Step 2 to prequalify for Compass Group, then mobilise your workers.
Not sure, or lost your login?
Call 1300 722 801 or log a support ticket via the support portal. Have your company name and ABN handy.
Company is registered, but you can't log in?
Ask one of your company's existing admins to set you up (System Settings > User login accounts), or ask them to log a ticket with your details.
Are you a branch of a bigger company?
Your branch can sit under the parent company. Call us if you're not sure who your company admin is.
How Compass Group is set up
System terminology: 'Worksite' = Compass Group – client (for example Anglo, BHP or Rio Tinto). 'Mobilisation' = the location (site) the worker will attend. 'Job title / role' = the trade the worker will perform. Contractor roles end in (c).
You can mobilise the same worker to more than one client or location. Do a separate mobilisation for each one. The job title and the location decide which licences, documents and training the worker needs.
Before you start
Have the following ready before you begin.
For company registration:
- Your ABN (or NZBN if applicable)
- Your registered / trading name
- Your contact details
For company prequalification:
- Safety management plan or safety procedures
- WHMS / WHS policies, SWMS or JHA
- ISO 45001 (or equivalent) certification
- Safety data sheets
- Incident reports
- Public liability insurance
- Workers compensation
- Professional indemnity insurance
For each worker:
- Their personal details and their own email address
- A colour, passport-style photo (PNG or JPEG) — head and shoulders, square on, face straight ahead, eyes clearly visible, with no sunglasses, reflections, hat or anything covering the head (except for religious purposes)
- Photo ID — the front of a current driver's licence (Australian, international or digital), passport, or photo card ID (card or digital)
- The work tickets and licences needed for the job they'll be doing, for example High Risk Work Licences or VOCs
- For some sites, extra evidence such as a police check, a medical or a Standard 11
Tip
Get each worker's date of birth right first time — it can't be changed after their profile is created. Ideagen can't crop a photo from an ID document, so upload a separate photo.
Step 1: Register your company
Only needed if your company has never registered with Ideagen. Already registered? Go to Step 2.
- Go to www.damstratechnology.com.
- Click Login & Register.
- Choose Ideagen Workforce Safety, then Register your company.
- Fill in the form. When it asks for the 'worksite', search for Compass Group.
- Enter the contact person for employee inductions, registrations and training. This person receives notifications about your workers.
Ideagen will process your registration and email you a username and password for your Company Portal. If it's taking longer than expected, call 1300 722 801 or contact support via the support portal.
Step 2: Prequalify your company
Prequalification is required for every company working with Compass Group. You can't mobilise any workers until it's approved. Once your company is registered, Compass Group will email you an invitation to prequalify.
- Open the invitation and click Start Prequalification.
- Pay the invitation fee.
- Complete the prequalification questionnaire. The questions depend on your business type.
- Upload the required documents, with their expiry dates.
- Submit. If anything needs clarifying, you'll see it under Attention required.
- When you're approved, you'll get a 'You can now mobilise employees' email. Click Proceed to mobilisation setup to continue.
Expired prequalification documents can stop your company working at Compass sites. Renew them before they expire.
Step 3: Add and mobilise your workers
- Log in at the Contractor Portal: au.damstraglobal.com. (Forgotten your login? Click 'Forgotten username/password' and enter the email address on the account.)
- Click Workforce Management > Mobilise an Employee, or Home > Mobilise an Employee.
- Choose One of your existing employees (then pick their name) or A new employee for your company.
- Select the worksite — Compass Group and the client — and the mobilisation (location).
- Click Next.
You'll then see the sections that need to be filled in. You can complete them in any order, and your progress saves automatically. The icons show what's done:
- Orange ! — incomplete required section
- Grey ! — incomplete but not required yet
- Orange tick — complete, verification required
- Green tick — complete, no verification required
- Employee's details — enter the worker's personal and contact details, address and next of kin. Use the worker's own email address, because training links go there. For an existing employee the fields are filled in for you. If they were last mobilised more than three months ago, you'll be asked to confirm their details.
- Photo & ID — upload the passport-style photo, choose the type of photo ID and upload it.
- Preferred session (only if the location needs a booked induction) — pick an induction session from the calendar. The session you choose sets the date by which everything must be complete.
- Job titles, roles & tasks — select all the trade services roles the worker will perform on site. The roles you pick decide which licences and documents you'll need to upload. Choosing the right roles here avoids delays to the worker starting on site.
- Employee requirements — upload each required licence, ticket or document, with its start and expiry dates.
- Employee online training — check the list of online lessons the worker must complete. These don't need to be finished before you submit.
Once every required section shows as complete, click Pay & send for verification. You can pay any worker fee shown by credit card or purchase order.
You can see the status of every mobilisation on the Active Mobilisation Requests page.
Sending tasks to your worker
You can email some tasks to the worker so they can fill them in themselves. This works for the Employee's details, Photo & ID and Employee requirements sections.
- Open the section. Click Forward all incomplete to send every outstanding task, or Forward next to a single task.
- Enter the email address to send the tasks to and click Forward.
- The worker receives an email with a Complete now button. The link expires after 7 days.
- Once they've finished, go to Active Mobilisation Requests > Yet to send for verification and submit it.
To take a task back, click Undo forward. To nudge the worker, click Send reminder.
Step 4: Complete the required training
- Training links are emailed directly to the worker — for existing employees when the mobilisation is reviewed, and for new employees 2–3 hours after their profile is approved. Ask them to check spam.
- The worker also receives a 'Welcome to Ideagen Learning' email to log in and set a password.
- Training doesn't need to be finished before you submit the worker's registration, but it does need to be finished before their site induction.
- Links expire after 14 days, and follow-up emails are sent for overdue training.
What happens next?
Ideagen reviews your uploaded documents and any induction booking against the site's requirements, usually within 24 hours, and approves or declines them. When training is complete, a confirmation email goes to your company and the worker. Once the worker has attended the onsite induction and the site confirms it, their mobilisation is activated.
Something declined?
You'll get an email explaining why. Click the link in that email, or log in and go to Active Mobilisation Requests > Attention Required, then upload the corrected document. If an induction booking is cancelled (for example, the session is full or the date has passed), rebook it the same way.
Urgent?
Call 1300 722 801 to ask for priority. Priority goes to induction requests in the next 24 hours, but we can't guarantee instant processing.
Which roles can I select?
Compass is onboarding trade-licensed services only at this stage. These are the contractor job titles you'll see, grouped by trade:
- Electrical and communications: Apprentice Electrician (c), Cable Jointer (c), Data & Communication Engineer (c), Electrical Appliance Serviceperson (Disconnect & Reconnect) (c), Electrical Technician (c), Electrician (c), Electrician - High Voltage (c), Line Mechanic (c), Security Equipment Installer (c), Telecommunications and Cabling Installer (c), Test and Tag (c)
- Air-conditioning and refrigeration: Air-conditioning and Refrigeration Apprentice (c), Install Only (c), Mechanic (c), Mechanic (QLD) (c), Supervisor (c), Supervisor (NSW) (c), Technician (c)
- Plumbing and gas: Apprentice Gas Fitter (c), Apprentice Plumber (c), Drainer (Tradesperson) (c), Drainer/Plumber (c), Gas Fitter (c), Hot Water Systems Worker (c), Plumber (c), Plumber (QLD) (c), Roof Plumber (c)
- Fire protection: Fire Protection Systems Technician : Servicing (c), Fire Services Technician (c), Fire Sprinkler Fitter (c)
- Building and construction: Asbestos Removal - Friable Class A (c), Asphalter (c), Boilermaker (c), Bricklayer (c), Bricklayer Supervisor (c), Carpenter (c), Concrete Cutting Machine Operator (c), Concreter (c), Fencing Contractor (c), Formworker (c), Glazier (c), Handy Person (c), Joinery: Contractor (c), Locksmith (c), Painter (c), Plasterer (c), Roof Tiler (c), Sheet Metal Worker (c), Stonemason (c), Structure Engineer (c), Surveyor (c), Wall and Floor Tiler (c), Waterproofer (c)
- Heights, access and plant: Abseiler (c), Advanced Scaffolder (c), Confined Space Entry (c), Elevated Work Platform Operator (Over 11m) (c), EWP Operator {Boom Type - Under 11 m} (c), Excavator (c), Intermediate Scaffolder (c), Scaffolder (c)
- Grounds and pest: Arborist (c), Landscaper (c), Pest Control Technician (c)
- Mechanical, transport and vendors: Lift Service Technician (c), Mechanic (c), Traffic Controller - Level 1 (c), Level 2 (c), Level 3 (c), Transport Services (c), Truck Driver (c), Vendor Installation/Maintenance (c)
Worker's role not listed?
Don't mobilise them into a different role to get them through — their requirements wouldn't match the work they do, and the mobilisation may be declined. Instead, email Compass Supplier Compliance at [SUPPLIER COMPLIANCE EMAIL] with your company name and ABN, the worker's name and the role they need, the client and location they'll attend, and the licences or qualifications the role requires.
Moving a worker over from another company
If a new worker of yours is already in the system under another company, and they've finished up there, you can move them across to your company instead of registering them from scratch. Their transferable documents come with them.
- Log in to your Company Portal.
- Go to Mobilise an Employee and select 'A new employee for your company', then choose the worksite and mobilisation.
- Enter the worker's name, date of birth and email address.
- The system checks whether they're already registered elsewhere. If they are, you'll see a message telling you so.
- Click Request Permission. The worker receives a message asking them to confirm they now work for you.
- Once they confirm, go to Active Mobilisation Requests > Yet to send for verification and submit it.
Keeping worker details up to date
In the portal, go to Workforce Management > All employees to search for a worker, view their profile, and manage their qualifications.
For expiries, go to Workforce Management > Employee Expiries, or click All expiries on the Home screen. From there you can filter by client or site and see what's coming up, up to five years ahead. We also email you a list of upcoming expiries every month.
If something expires before you update it, site access may be affected.
For portal guides, induction booking information and FAQs, go to Workforce Management > Worksite documents & info.
Frequently asked questions
Can I mobilise a worker before my prequalification is approved?
No. Prequalification must be approved first.
Why can't I see the job title I need?
Only approved trade services roles are available at this stage. Check the role list above. If the role isn't there, contact Compass Supplier Compliance.
Why do the roles end in (c)?
The (c) marks a contractor role. Compass employees use separate roles, so you'll only see contractor ones.
Does one mobilisation cover every Compass site?
No. Each mobilisation is for one client location. Mobilise the worker to each location they'll attend.
My worker's training link has expired. What now?
Links expire after 14 days. Call 1300 722 801 to have them resent.
Can my worker complete their own details and documents?
Yes. Use Forward to send the tasks to them. They have 7 days to complete them.
Need help?
Questions about roles, site access or whether a worker can be approved: contact Compass Supplier Compliance at [SUPPLIER COMPLIANCE EMAIL].
For anything else in Ideagen Workforce Safety, here's how to reach the Global Support Centre (GST):
- Phone: 1300 722 801
- Support ticket: raise a ticket via the support portal.
- Help articles: damstra.zendesk.com/hc/en-us
- Live chat: look for the chat icon at the bottom right of any page.